Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small Knife

$100.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store wangyanfang2016-1
(1275) 100.0%,

Location: Longquan, Zhejiang
Ships to: US,
Item: 203901506422

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:14 Days
Refund will be given as:Money Back
Return policy details:
Type:Tanto
Handle Material:Wood
Blade Material:Carbon Steel
Theme:Samurai
Dexterity:Ambidextrous
Edge:Double,Straight
Handedness:Single-Handed
Authenticity:Original
Era:2010s
Color:Black
Original/Reproduction:Original
Style:Japanese
Tang:Rat-Tail

Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small KnifeProduct Parameter: Blade: 29 cm/11.4” Handle: 16 cm/6.3” Overal: 56 cm/22” HRC(Hardness): 56 Craft: 1095 High carbon steel, water quenching,hand-polishing,etc. Shape: straight double edge blade Handle: hard wood, imitated rayskin, synthetic silk ito Tsuba/Kashira/Fuchi: alloy,dragon design Saya: hard wood with black lacquer * Package: 1 sword with scabbard+1 bag * Manual measurement error range 1-2 cm TANTO: A tantō is one of the traditionally made Japanese swords that were worn by the samurai class of feudal Japan. The term has seen a resurgence in the West since the 1980s as a point style of modern tactical knives, designed for piercing or stabbing. The tantō is a dagger. The Blade is single or double edged with a length between 15 and 30 cm (6 12 inches, in Japanese 1 shaku). Women sometimes carried a small tantō called a kaiken in their obi primarily for self-defense.SWORD MOUNTINGS FOR CHOOSINGENGRAVING SERVICEHOW TO DISASSEMBLE A JP SWORDSWORD MAKING PROCESSESDELIVERY DETAILS & PAYMENTSWORD MOUNTINGS FOR CHOOSINGIf you don’t like the color or the style of the mountings, you can choose different ones from the options below. Just tell us your choice before purchase. TSUBAThe tsuba (鍔, or 鐔) is usually a round (or occasionally squareish) guard at the end of the grip of Japanese swords. They contribute to the balance of the sword and to the protection of the hand. The tsuba was mostly meant to be used to prevent the hand from sliding onto the blade during thrusts as opposed to protecting from an opponent’s blade. TSUBATSUKA-ITO & SAGEO Tsuka-ito is the wrapping of the tsuka and sageo (下緒 or 下げ緒) is a hanging cord that is passed through the hole in the kurigata (栗形) of a Japanese sword’s saya. SAMEGAWA Samegawa(鮫皮)is the ray or shark skin wrapping of the tsuka (handle/hilt). SAYA The saya is a wooden scabbard for the blade; traditionally done in lacquered wood.ENGRAVING SERVICEIt is freefor engraving English words,Chinese characters and Japanese Kanji. You need pay additional $20 for engraving patterns (dragon, lion, etc.) or other logos.HOW TO DISASSEMBLE A JP SWORDSWORD MAKING PROCESSESFormingSwords can be shaped by a variety of metalworking techniques.The primary techniques are forging and stock removal. Forging uses heat to bring the material to a malleable state. The material is then hammered to shape, typically using hammer and anvil together with specialized set and fuller tools depending on the particular technique. Stock removal shapes the sword from prepared stock that is larger in all dimensions than the finished sword by filing, grinding and cutting.QuenchingAfter the blade has been shaped, the sword would be quenched. We quench our swords in either water or oil. Water quenching produces a tougher edge which can also be hardened further more using clay. Blades quenched in oil are still considerably hardened and do have superior flexibility compared to a water quenched blade. The more rapidly a blade cools down, the harder it becomes. Thus, when a hot blade enters the water, the water also gains heat and the blade will cool more gradually. Therefore, the first part of the blade that enters the water will be the hardest. Therefore, the technique of quenching was also very important. If a blade has any flaws from forging (air bubbles, ash), it will break immediately during the quenching process.Tempering After quenching, the sword will be quite tough and brittle, with little flexibility. To overcome this, the blade would undergo a tempering process. The blade would be reheated to a certain temperature degree then allowed to cool naturally. The blade would be slightly less tough afterward but have a greater degree of flexibility – the art would be to perfectly balance the blade for toughness, sharpness and flexibility. Modifying ShapeFinishing Finishing encompasses polishing, decorating, and crafting and assembling the hilt, guard and sheath. The swordsmith would be most concerned with the state of the blade itself and possibly decorating the blade and preparing the guards and pommel. Other artisans would likely be involved in the work of fashioning the hilt, sheath and other furniture; and in any fine decoration. PolishingWhen the rough blade is completed, the swordsmith turns the blade over to a polisher, whose job it is to refine the shape of a blade and improve its aesthetic value. The polishing process almost always takes longer than even crafting, and a good polish can greatly improve the beauty of a blade, while a bad one can ruin the best of blades. Early polishers used three types of stone, whereas a modern polisher generally uses seven.On high quality blades, only the back of the blade and the adjacent sides, are polished to a mirror-like surface. To bring out the grain and hamon, the center portion of the blade, and the edge are usually given a matte finish. Microscopic scratches in the surface vary, depending on hardness. Smaller but more numerous scratches in the harder areas reflect light differently from the deeper, longer scratches in the softer areas. The harder metal appears more matte than the softer, and the manner in which it scatters light is less affected by the direction of the lighting.After the blade is finished it is passed on to a mountings-maker for fashioning the hilt, sheath and other mountings.DELIVERY DETAILS & PAYMENTInternational Buyers – Please Note:a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.b) Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. The shipment will be prepared and get shipment as soon as possible when you place the order. The shipping time is different according to the different area. US: 10-15 daysAU: 8-12 daysCa: 10-15 daysOthers: 25-60 daysIt is international shipment, so there are many factors influenced, please let us know if there is any question, we will try our best to make things right for you.

Frequently Asked Questions About Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small Knife in My Website

danielsanattorney.com is the best online shopping platform where you can buy Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small Knife from renowned brand(s). danielsanattorney.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small Knife on danielsanattorney.com?

Daniel-San Attorney

Daniel-San Attorney

Frequently Asked Questions About Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small Knife in My Website

What are the best-selling Sharp Self-defense Tanto 1095 Steel Short Japanese Sword Double Edge Small Knife on danielsanattorney.com?

Leave a Reply Cancel reply

About Us

Contact Us

Connect With Us