Keyless entry start starter remote controller GOH-FOUR alarm responder keyfob

$17.28 Buy It Now or Best Offer
free,30-Day Returns

Seller Store u.s.autoparts
(15884) 97.7%,

Location: Wellsboro, Pennsylvania
Ships to: US,
Item: 225864086539

Restocking Fee:No
Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Aftermarket Products:Aftermarket Products
Manufacturer Part Number:GOH-FOUR GOHFOUR G0H-FOUR 4 codealarm FCCID FCC
Interchange Part Number:P-5500 E-6500 CSM-2-5-3 P-100 P-750 P-1000 STARTER
Other Part Number:Stock 868 E-2000 E-4500 RKE-1 RCS-2 C-450 PT-4
Surface Finish:STOCK # 868 433.5 MHZ
Warranty:30 days
Part Brand:CODEALARM
Country/Region of Manufacture:Unknown
Type:Wireless
Color:Black
Features:keyless remote entry fob

@ Stock #: 868 (KD) jl This item is pre-owned – it will work like new once programmed to your vehiclebuttons have faded buttons and there is a crack in the corner of the casing. there is a hole in the casing One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement FUNCTIONS AT 100% TESTED & GUARANTEED Code Alarm FCC ID: GOH-FOUR (Alternate Spelling: GOHFOUR G0H-FOUR G0H-FOUR) Part #: PT-4Frequency: 433.5 MHz LED color: none 4 buttons Compatible with the following systems: P-5500, E-6500, CSM-2-5-3 also work some functions on: P-100, P-750, P-1000, P-3500, P-350, C-400, C-450, C-500, C-550 E-1100, E-COM, E-950, E-1500, E-2000, E-4500, RKE-1, RCS-2 Programming Instructions: Adding Remote Transmitters to Your System Your security system has the ability to operate from up to four (4) remote transmitters. Follow these instructions to add a remote transmitter to your system. 1. Make sure the security system is disarmed and the ignition is off. 2. Without starting the vehicle, turn the ignition ON, OFF, then ON, at 1/2-second intervals. After two (2) seconds, the status indicator will begin flashing for Code Entry. Follow the Code Entry Procedure. If the correct code is entered, the siren will chirp twice, indicating entry into the Transmitter Programming Mode. 3. Wait 5 seconds. Press the ARM button on the remote transmitter to be programmed. The siren will chirp once, indicating that the system has “learned” that transmitter. 4. Repeat step 3 for any additional remote transmitters. 5. Exit the Transmitter Programming Mode by turning the vehicle ignition on, then off. Test all remote transmitters to ensure that they work properly. Deleting Lost or Stolen Remote Transmitters from Your System If one of your remote transmitters is lost or stolen, follow these instructions IMMEDIATELY to remove the transmitter code from your system. 1. Make sure that you have all remaining remote transmitters available. 2. Enter the transmitter programming mode by following steps 1 and 2 under Adding Remote Transmitters to Your System (above). 3. a. If you have only one remaining remote transmitter, press the ARM button on that remote transmitter four (4) times, pausing at least five seconds in between each press. Make sure that the siren chirps each time you press the ARM button. b. If you have two remaining remote transmitters, press the ARM button on each remote transmitter two (2) times, pausing at least five seconds in between each press. Make sure that the siren chirps each time you press the ARM button. c. If you have three remaining remote transmitters, press the ARM button on the first remote transmitter two (2) times, then press the ARM button on the other two remote transmitters once. Pause at least five seconds in between each press. Make sure that the siren chirps each time you press the ARM button. 4. When you are finished, the lost or stolen remote transmitter will no longer operate your system. Programming Selectable Options 1. Make sure the system is disarmed and the ignition is off 2. Without starting the vehicle turn the ignition ON, OFF, ON, OFF, then ON, at 1/2-second intervals After two (2) seconds the status indicator will begin flashing for Code Entry. Follow the Code Entry Procedure. If the correct code is entered the siren will chirp three times, indicating entry into the Selectable Options Mode. 3. Press the ARM button on a programmed transmitter to begin option selections. Option Number and Description Bold Type Indicates Factory Settings Status Indicator ON Status Indicator OFF 1. Doors lock when all doors are closed and vehicle ignition s turned on YES NO 2. Doors unlock when vehicle ignition is turned off YES NO 3. Lock / Unlock Output Duration 6 sec. 1/2 sec. 4. Trunk/Aux Output is Activated by Pressing and Holding ARM or DISARM ARM DISARM 5. Siren chirps when arming and disarming YES NO 6. System arms automatically 20 seconds after last door is closed YES NO 7 Auxiliary Output 1 Timer Programming See Timer Programming Section Below 8 Auxiliary Output 2 Timer Programming Code Entry Procedure This security system utilizes a secret code for adding or deleting remote transmitters, changing system options and disarming the alarm if the remote transmitter fails to operate. The 4 digit code should be written on the front of this manual by your installer If not the code is found on a sticker on the back of the alarm module Below is the procedure for entering the code. 1. Enter the Code Entry Mode by following the steps in the Adding Remote Transmitters to Your System, Programming Selectable Options or the Emergency Disarm Procedure sections of this manual The status indicator will begin flashing for Code Entry 2. Look at the first number in the code Allow the status indicator to flash the corresponding number of times as the first number in the code 3. After the status indicator has flashed the corresponding number of times, turn the vehicle ignition off The first number has been entered 4. Turn the ignition back to the ON position The status indicator will again begin flashing Repeat the procedure in steps 2 and 3 this time using the second number in the code 5. Repeat steps 2 and 3 for the third and fourth numbers in the code 6. After the fourth number has been entered correctly the alarm will disarm, or enter the desired programming mode Note: If you enter an incorrect digit turn the vehicle ignition off then on. When the status indicator begins to flash, re-enter the code from the beginning Example: The code is 2314 1. Enter the Code Entry mode The status indicator will begin flashing for Code Entry 2. Allow the status indicator to flash two (2) times After the second flash turn the vehicle ignition off 3. Wait one second then turn the ignition on 4. Allow the status indicator to flash three (3) times After the third flash turn the vehicle ignition off 5. Wait one second then turn the ignition on 6. Allow the status indicator to flash one (1) time After the flash turn the vehicle ignition off 7. Wait one second then turn the ignition on 8. Allow the status indicator to flash four (4) times After the fourth flash turn the vehicle ignition off IMPORTANT!!! Be sure to remember your code and keep it in a safe place. If the code is lost, it cannot be recovered. Instructions for programming your new Code Alarm Remote (2 & 4 Button Transmitters Only) Note: Each System module has four “slots”, or memory locations, to store transmitter codes, giving it the ability to operate from up to four transmitters. For proper operation, a transmitter code must be stored into each memory slot. When using less than four transmitters, follow the suggested programming parameters: · One Remote Transmitter – Program four (4) times · Two Remote Transmitters – Program each transmitter two (2) times. · Three Remote Transmitters – Program two transmitters one (1) time, and the remaining transmitter twice. 1. Open the driver’s door, leave the door open and make sure the dome light is ON. 2. Turn vehicles ignition on (Ignition ON engine OFF). 3. Press and hold emergency override button (A small black headed push button commonly found under the driver side dash) After about 10-13 seconds, the siren or horn will sound three (3) times. This indicates that the unit has entered the transmitter-programming mode. 4. Continue to hold in the programming override button. 5. Press the ARM (or LOCK) button on the remote transmitter to be programmed. The siren or horn will sound once, indicating that the system has “learned” that remote transmitters code. 6. Repeat step 5 for any additional transmitters or transmitter codes. 7. Release the programming override button. 8. Turn the ignition off to exit the programming mode. Test remote transmitters to ensure that they work properly by toggling back & forth the LOCK and UNLOCK buttons. STOP! Before You Buy Please Read… Program Remote To Your Vehicle If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first. This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system: 1. PLEASE REFER TO YOUR ORIGINAL OWNER’S GUIDE FOR YOUR AFTERMARKET INSTALLED KEYLESS ENTRY SYSTEM OR 2. CONTACT A LOCAL CAR/AUDIO SHOP 3. CONTACT A LOCKSMITH 4. CONDUCT A GOOGLE SEARCH 5. CONTACT MANUFACTURER Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days. PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store. Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u). 100% Guarantee Remote Shipping / Return Policy Shipping & Handling Combined Shipping & Handling Discount (multiple item purchase discount): S&H discount = the price of the 1ST remote’s S&H + 1.99 each additional remote’s S&H Shipped From: Pennsylvania, USA Shipping Method: USPS mail service USA Shipment Options: ◊ USPS 1ST class mail service ◊ USPS Priority class mail service ◊ USPS EXPRESS class mail service Canadian Shipment Options: ◊ USPS 1ST class mail service ◊ USPS Priority class mail service ◊ USPS Express class mail service Worldwide (Outside of USA & Canada) Shipment Options: ◊ USPS Priority class mail service ◊ USPS Express class mail service Warranty/Returns: 1. We have a 30 day return policy. 2. All returns for replacements and refund need an RMA #. 3. Please contact us before returning items so we can give you the RMA # and the proper return address. 4. No refunds / replacements will be granted without an RMA# We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system. Normal 0 false false false EN-US X-NONE X-NONE . . . . . . . . Powered by The free listing tool. List your items fast and easy and manage your active items. . . . . . . . . . . . . . . . .

Frequently Asked Questions About Keyless entry start starter remote controller GOH-FOUR alarm responder keyfob in My Website

danielsanattorney.com is the best online shopping platform where you can buy Keyless entry start starter remote controller GOH-FOUR alarm responder keyfob from renowned brand(s). danielsanattorney.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Keyless entry start starter remote controller GOH-FOUR alarm responder keyfob on danielsanattorney.com?

Daniel-San Attorney

Daniel-San Attorney

Frequently Asked Questions About Keyless entry start starter remote controller GOH-FOUR alarm responder keyfob in My Website

What are the best-selling Keyless entry start starter remote controller GOH-FOUR alarm responder keyfob on danielsanattorney.com?

Leave a Reply Cancel reply

About Us

Contact Us

Connect With Us